Twin Pulse electronic module
Series 1432
Twin Pulse electronic module for volumetric meters with pulse probe. Wall-mounted installation.
Necessary to convert the Reed signal from the meter impulse-senders into an M-Bus signal, and transmit it remotely to a data logger (if no "H-S/HC-S" type electronics is available).
Water volumes are metered by converting the output signal from the volumetric meter with an impulse-sender from REED to M-BUS and then sending it to a data logger.
| When connected to the M-Bus, the "Twin Pulse" is powered by the latter; a built-in battery ensures that measurement continues if the M-Bus is disconnected. |
| Each volumetric meter equipped with impulse-sender corresponds to 1 impulsive input. |
| The electronic module requires programming via Micromaster peripheral and special software. Programmed as standard for meters with impulse factor 10 litre/impulse. Values expressed in m³ |
| Max 2 meters can be coupled |
| Wall-mounted. |
| Compatibility: Reed - Potential-free contacts - Floating |
| Battery CR2032, duration approximately 1 year with disconnected bus |
| Standard M-Bus data transmission log |
| Consumption of the module connected to the bus: 1.4 mA |
| IP68 protection rating |
| Each volumetric meter equipped with impulse-sender corresponds to 1 impulsive input. |
| The electronic module requires programming via Micromaster peripheral and special software. Programmed as standard for meters with impulse factor 10 litre/impulse. Values expressed in m³. |
Download
Twin Pulse electronic module
| Code | Model | Impulsive inputs | Box | Carton | Cat. | € |
| 14320022 | Twin Pulse | 2 | 1 | 1 | 03.03 | ||14320022_LastPrice|| |